Cubicle removal means taking apart office workstations panel by panel, then hauling the parts away for reuse, recycling or disposal. Before the crew arrives, an electrician should disconnect any powered panels. Plan for disassembly time, building access and what the space should look like afterward.

Cubicles look simple, but they are built from dozens of connected parts. Panels, work surfaces, overhead bins, file pedestals and power raceways all come apart in a set order. Rushing it damages floors and walls.

How does cubicle removal work?

1. Clear the stations. Staff empty drawers, overheads and desktops before teardown day.
2. Cut the power. A licensed electrician disconnects powered panels from the building feed.
3. Remove the top pieces. Overhead bins, shelves and work surfaces come off first.
4. Separate the panels. Connectors and posts are released so panels lift out one by one.
5. Stack and protect. Reusable panels are stacked and wrapped. Damaged parts go to recycling or disposal.
6. Sweep the floor. Glides, screws and dust are cleared before the next trade comes in.

Should you reuse, donate or recycle old cubicles?

Older cubicles often have value only as scrap metal. Newer systems in good condition can sometimes be reconfigured. Ask your furniture dealer before you decide.

Why are businesses removing cubicles?

• ✓Hybrid work. Fewer people in the office every day means fewer fixed desks.
• ✓Open layouts. Benching, huddle rooms and hot desks replace rows of tall panels.
• ✓Wellness. Better light and sit-stand desks are easier to fit without high walls.
• ✓Lease changes. Downsizing or subleasing often starts with clearing workstations.

How do you prepare your office for cubicle removal?

• ✓Book the electrician. Schedule power disconnects before teardown day.
• ✓Clear personal items. Ask staff to empty everything the night before.
• ✓Disconnect IT. Have phones, monitors and computers unplugged and moved out.
• ✓Reserve the elevator. Panels are long and heavy, so freight elevator access helps.
• ✓Plan the next step. Know whether carpet, painters or new furniture come in next.

What happens to the space after cubicle removal?

Taking out cubicles often reveals problems that were hidden for years. Plan for them before the panels come down.

• ✓Carpet lines. Faded or crushed carpet often shows the old cubicle footprint.
• ✓Floor boxes and cores. Power and data openings in the floor may need to be capped.
• ✓Wall damage. Panels mounted to walls can leave anchor holes that need patching.
• ✓Cable bundles. Loose data cable above the ceiling or under the floor may need removal.

Line up your carpet installer, electrician or painter so they can start right after teardown. That keeps your floor out of service for the shortest time. If you need furniture held during the work, we offer storage during renovations.

Cubicle removal across the Philadelphia suburbs

LiteMovers removes workstations for businesses in King of Prussia, Blue Bell, Exton and beyond.

Cubicles are often part of a bigger change. See our guides to office furniture removal and full office cleanouts. When new furniture arrives, our receiving and delivery service can place it.

Keeping safe while lifting heavy panels matters. OSHA shares guidance on workplace ergonomics that is worth a look for any team doing physical work.

Cubicle Removal FAQs

How are office cubicles removed?

Cubicles are taken apart in reverse order of assembly. Overhead bins and work surfaces come off first, then connectors are released so the panels lift out. Before teardown, a licensed electrician should disconnect any powered panels. The parts are then hauled away for reuse, recycling or disposal.

Do I need an electrician for cubicle removal?

Often, yes. Many cubicle systems carry building power through a raceway in the base of the panels. A licensed electrician should disconnect that power before anyone takes the stations apart. Unpowered cubicles that only use wall outlets usually do not need an electrician.

Can old cubicles be donated?

Sometimes. Clean, complete cubicles in good condition may be accepted by schools, nonprofits or used furniture dealers. Older or stained panels are harder to place. Steel frames and parts can usually go to metal recycling when donation is not an option.

How long does it take to remove cubicles?

It depends on the number of stations, the panel system and building access. A small group of workstations may take a few hours. A full floor of cubicles can take one or more days. A reserved freight elevator and cleared desks speed things up.

2 Easy ways to get a
FREE ESTIMATE
Click below and fill out the move detail form

FREE ESTIMATE

Or just give us a call today at 610-755-5535